fbpx

4.0 Pre-Trip, Enroute, and Post-Trip Inspection

Overview

This lesson teaches the importance of pre-trip, en-route, and post-trip inspections, including techniques for inspecting: emergency exits and roof hatches; passenger-carrying CMV interiors; restrooms (each bus seating more than 14 passengers must have a clean restroom, or make reasonable rest stops); temperature controls; driver and passenger seat belts; security-related items (unusual wires, abnormal materials); interior and exterior luggage compartments; packages or luggage left behind; signs of cargo or vehicle tampering; and cycling-accessible lifts and their functionality.

Before Driving — Pre-Trip

Before driving your bus, you must be sure it is safe. You must review the inspection report made by the previous driver. Only if defects reported earlier have been certified as repaired or not needing repair should you sign the previous driver’s report — this is your certification that the defects have been fixed.

People sometimes damage unattended buses. Always check the interior before driving: aisles and stairwells should always be clear. The following must be in safe working condition: each handhold and railing, floor covering, signaling devices (including restroom emergency buzzer if equipped), emergency exit handles, and all seats (securely fastened to the bus). Never drive with an open emergency exit door or window. The “Emergency Exit” sign must be clearly visible, and the red emergency door light must work if equipped.

Drivers should also make sure passenger signaling devices and brake-door interlocks work properly.

Vehicle Systems to Check

Service brakes (including air hose couplings), parking brake, steering mechanism, lights and reflectors, tires (front wheels must not have recapped or re-grooved tires), horn, windshield wipers, rear-vision mirrors, coupling devices (if present), wheels and rims, and emergency equipment (fire extinguisher, emergency reflectors, spare electrical fuses unless equipped with circuit breakers).

Roof Hatches and Access Panels

You may lock some emergency roof hatches in a partly open position for fresh air. Do not leave them open as a regular practice. Keep in mind the bus’s higher clearance while driving with them open. Close any open emergency exits and access panels (baggage, battery, restroom service, engine) before driving.

Emergency Exits

Point out the location of all emergency exits (push-out windows, roof vent, side door) and explain how to operate them. Emphasize that the motorcoach door should be the primary exit choice. Encourage able-bodied passengers to assist injured or mobility-impaired passengers during evacuation. Provide guidance per 49 CFR 392.62, “Safe operation, buses.”

Driver Vehicle Inspection Report (DVIR)

Drivers are required to complete a daily written post-trip inspection report at the end of each driving day. The report must identify the vehicle and list any defects or deficiencies that could affect safety or result in a breakdown. The motor carrier must certify that defects have been repaired or that repair is unnecessary. The motor carrier must maintain the original copy for 3 months.

General Vehicle Inspection Requirements

Every motor carrier shall systematically inspect, repair, and maintain all motor vehicles subject to its control. Parts and accessories must be in safe and proper condition at all times. Pushout windows, emergency doors, and emergency door marking lights must be inspected at least every 90 days. CMVs must not be operated in a condition likely to cause an accident or breakdown.

Required Records

For vehicles controlled 30 consecutive days or more, the carrier must maintain: vehicle identification (company number, make, serial number, year, tire size); a means to show the nature and due date of maintenance operations; a record of inspections, repairs, and maintenance; and a record of tests on pushout windows, emergency doors, and emergency door marking lights.