fbpx

1.0 Post-Crash Procedures

Overview

This lesson will teach appropriate post-crash procedures, including the requirement that the driver, if possible: assess his or her physical condition immediately after the crash and notify authorities; assign tasks to a passenger or other individuals at the crash scene; obtain emergency medical assistance; move on-road vehicles off the road in minor crashes so as to avoid subsequent crashes or injuries; engage emergency equipment (flashers, reflective triangles, and other warning devices for stopped vehicles); and properly use a fire extinguisher if necessary.

Stay Calm — Prevent Another Accident

Assess your physical condition immediately after the crash. Turn on your 4-way flashers to create a warning signal. If you are physically able to locate the bus fire extinguisher, put out any fires to prevent additional health and safety risks to the passengers and yourself. If you are not able to, assign a passenger that can complete the task for you. Any fire on the bus must be dealt with as soon as possible.

If you have the slightest doubt about your ability to fight a fire — EVACUATE IMMEDIATELY!

How to Use a Fire Extinguisher — The P.A.S.S. Technique

Information provided by OSHA.gov. Most fire extinguishers operate using the following P.A.S.S. technique:

PULL — Pull the pin. This will also break the tamper seal.

AIM — Aim low, pointing the extinguisher nozzle (or its horn or hose) at the base of the fire. NOTE: Do not touch the plastic discharge horn on CO2 extinguishers; it gets very cold and may damage skin.

SQUEEZE — Squeeze the handle to release the extinguishing agent.

SWEEP — Sweep from side to side at the base of the fire until it appears to be out. Watch the area. If the fire re-ignites, repeat steps 2–4.

Call for Help and Move Off the Road

If you are physically able to, notify authorities or assign a passenger to do it for you. Be courteous and cooperative when providing information to the authorities. Never leave the scene of an accident unless your CB radio or cellular phone is not working and there is no one else to make the necessary calls. After making the necessary calls, return to the scene of the accident. If your physical condition allows it, do a quick evaluation of the accident and victims, if any. If your vehicle can move, pull as far off the roadway to a safe place as possible to help reduce additional accidents.

Warning Devices

When putting out the triangles, hold them between yourself and the oncoming traffic for your own safety so other drivers can see you.

Where do I place my warning devices?

If you must stop on or by a one-way or divided highway, place warning devices 10 feet, 100 feet, and 200 feet toward the approaching traffic.

If you stop on a two-lane road carrying traffic in both directions or on an undivided highway, place warning devices within 10 feet of the front or rear corners to mark the location of the vehicle and 100 feet behind and ahead of the vehicle, on the shoulder or in the lane you stopped in.

If you stop beyond any hill, curve, or other line-of-sight obstruction that prevents other drivers from seeing the vehicle within 500 feet, move the rear-most triangle to a point back down the road so warning is provided.

NOTE: FMCSR requires that emergency warning devices be set out within 10 minutes of stopping.

Help the Injured

Assign passengers tasks to help everyone on board that needs medical attention. When authorities arrive you will already know who needs medical attention, and passengers with life-threatening complications can be taken care of quickly. Having a plan in place when authorities arrive could save someone’s life.

Post-Accident — Gather and Report Accident Information

If your medical condition allows, check your bus for an emergency kit for documenting the accident. Write down names, license numbers, and other information regarding the accident and those people involved. Draw a simple diagram of the accident scene. The more detail you can provide, the better it will be for insurance and/or legal purposes later.

The kit should contain: a pen, an accident report form, witness cards, and an accident notification card.

Post-Crash Drug and Alcohol Testing

Under FMCSA regulations (49 CFR Part 382), post-crash drug and alcohol testing is required when the crash involves a fatality, when the CMV driver receives a citation and there is a bodily injury requiring immediate medical treatment away from the scene, or when the CMV driver receives a citation and any vehicle is towed. Alcohol testing must occur within 8 hours and drug testing within 32 hours of the crash. You must not consume alcohol for 8 hours following a crash or until you have been tested.